Initial recommended base settings for stage 1 modifications.
GRN @ 5.5
YEL @ 4
RED @ 4.5
G/B @ 4.5
Y/B @ 6.5
R/B @ 4.5
Controller settings for diagnostic purposes of running 0% change through entire drive cycle. These settings mean your vehicle is running on the stock ECU map.
THE CONTROLLER WILL STAY POWERED UP FOR 10 MINUTES AFTER TURNING OFF THE VEHICLE ON CERTAIN MODEL YEARS
The stock ECU will leave power on the injectors which leave the controller powered up after the vehicle has been turned off.
This will not drain the battery or have any effect on the vehicle.