Initial recommended base settings for stage 1 modifications.
GRN @ 5
YEL @ 6
RED @ 5
G/B @ 6.5
Y/B @ 3.5
R/B @ 5.5
Controller settings for diagnostic purposes of running 0% change through entire drive cycle. These settings mean your UTV is running on the stock ECU map.
Controller LEDs on after shutting off your UTV is NORMAL. Please watch this quick YouTube video. Click here
7/1/2016 - ECU codes 65590, 65591 and 65592 - May occur after getting the Polaris recall in April 2016 completed. They are cylinder misfire codes for cylinder #1 and cylinder #2. These codes are not in the service manual and will only come up once the ECU has been re-flashed due to a Polaris recall. MAIN CAUSE has been related to the belt which may have too much deflection or may be slipping. Polaris suggests to change the belt out with a new one and/or replace spark plugs.
4/19/2016 - Polaris Recall - RZR 900 / 1000 vehicles - Affects the voltage regulator - Read Info Here