Controller settings for diagnostic purposes of running 0% change through entire drive cycle. These settings mean your ATV is running on the stock ECU map.
GRN @ 5.5
YEL @ 0.5
RED @ 0.5
G/B @ 0.5
Y/B @ 6
R/B @ 6
Initial recommended base settings for stage 1 modifications.
Controller plugs into a 6 pin sub-harness and NOT directly onto the injectors.
This controller has a global offset of -10% affecting the fueling at all times. This allows for a 4th zone to be implemented which splits apart the idle fuel from the cruise fuel. With the Green/Blue setting at 5.5 the transition is set around 1150 rpm.
The GREEN zone engages at 1140rpm with a GREEN/BLUE setting of 5.5.
|
0 Items
